0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors
FH 23 Series
●Staggered termination configuration. Only 1.25 mm
above the board.
Leadless type
Sep.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Completely enclosed
bottom surface
Lead type
1.25mm
■Features
1. FPC low insertion force and high holding force
Hirose Electric's unique low insertion force (LIF) design
(patents pending) improves the Flexible Printed Circuit
(FPC) holding force after insertion.
2. Temporary hold of FPC
There is no need to hold the FPC after insertion in the
connector. The connector will hold it in correct position,
allowing closing of the actuator.
3. Easy board mounting
The surface mounted termination of the contacts is staggered
on 0.6 mm centers, positioned on front and back of the
connector.
Bottom of the connector is completely insulated,
allowing conductive traces on PCB to run under the
connector.
When the actuator is opened
4. Proven Flip-lock Actuator assures easy
and reliable operation
Rotating actuator permits easy insertion and reliable
connection with the FPC. Tactile sensation confirms complete
mechanical locking of the actuator and the electrical
connection.
5. Variations to suit different mounting areas
Available with lead and leadless type of terminations
(for opposing FPC insertion side).
6. Designed for placement with automatic
equipment
Temporary hold of FPC
Flat top surface allows pick-up with vacuum nozzles.
Packaged in embossed tape, on reel. One reel contains 2,500
pieces.
7. Accepts 0.2mm thick FPC
8. Variety of contact positions
Available with 15,17,21,23,25,27,31,33,37,39,45,51,61and 71
pos.
9. Halogen Free
The connector does not use chlorine and bromine
exceeding standard limits.
*Defined in accordance with IEC61249-2-21
*Br 900ppm or lower, Cl 900ppm or lower, Br + Cl 1,500ppm or
lower
When the actuator is closed
2013.11w
1