MP8671
10A, 25V, 600KHz Step-Down Converter
with Synchronizable Gate Driver
The Future of Analog IC Technology
DESCRIPTION
FEATURES
The MP8671 is a monolithic step-down switch
mode converter with a built in internal power
MOSFET. It achieves 10A continuous output
current over a wide input supply range with
excellent load and line regulation.
•
•
•
•
•
Current mode operation provides fast transient
response and eases loop stabilization.
Fault condition protection includes cycle-by-cycle
current limiting and thermal shutdown.
The MP8671 requires a minimum number of
readily available standard external components
and is available in a space saving 3mm x 4mm
14-pin QFN package.
•
•
•
•
•
•
•
Wide 4.5V to 25V Operating Input Range
10A Continuous Output Current
60mΩ Internal Power MOSFET Switch
Power Good Indicator
Synchronous Gate Driver Delivers up to
95% Efficiency
Fixed 600KHz Frequency
Synchronizable to >1MHz External Clock
Cycle-by-Cycle Over Current Protection
Thermal Shutdown
Output Adjustable from 0.8V
Stable with Low ESR Output Ceramic
Capacitors
Available in a 3mm x 4mm 14-Pin QFN
Package
APPLICATIONS
•
•
•
•
•
Point of Load Regulator in Distributed
Power System
Digital Set Top Boxes
Personal Video Recorders
Broadband Communications
Flat Panel Television and Monitors
“MPS” and “The Future of Analog IC Technology” are Registered Trademarks of
Monolithic Power Systems, Inc.
TYPICAL APPLICATION
IN
BST
SW
VCC
11
100
8, 9, 10
95
90
BG
PG
13
85
80
OFF ON
EN/SYNC
GND
14
MP8671 Rev. 1.1
12/13/2007
FB
1
75
70
0
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2007 MPS. All Rights Reserved.
2
4
6
8
10
1