ICL8211, ICL8212
TM
October 1999
NO RE
UCT
PROD
ENT
O L ET E R EPL A C EM
OB S
EN D ED
C O MM
Programmable Voltage Detectors
Features
Description
• High Accuracy Voltage Sensing and Generation
The Intersil ICL8211/8212 are micropower bipolar monolithic
integrated circuits intended primarily for precise voltage
detection and generation. These circuits consist of an
accurate voltage reference, a comparator and a pair of
output buffer/drivers.
• Internal Reference 1.15V Typical
• Low Sensitivity to Supply Voltage and Temperature
Variations
• Wide Supply Voltage Range Typ. 1.8V to 30V
• Essentially Constant Supply Current Over Full Supply
Voltage Range
• Easy to Set Hysteresis Voltage Range
• Defined Output Current Limit ICL8211
• High Output Current Capability ICL8212
Specifically, the ICL8211 provides a 7mA current limited output sink when the voltage applied to the ‘THRESHOLD’
terminal is less than 1.15V (the internal reference). The
ICL8212 requires a voltage in excess of 1.15V to switch its
output on (no current limit). Both devices have a low current
output (HYSTERESIS) which is switched on for input
voltages in excess of 1.15V. The HYSTERESIS output may
be used to provide positive and noise free output switching
using a simple feedback network.
Applications
• Low Voltage Sensor/Indicator
Ordering Information
• High Voltage Sensor/Indicator
• Nonvolatile Out-of-Voltage Range Sensor/Indicator
PART NUMBER
TEMPERATURE
RANGE
o
PACKAGE
o
• Programmable Voltage Reference or Zener Diode
ICL8211CPA
0 C to +70 C
8 Lead Plastic DIP
• Series or Shunt Power Supply Regulator
ICL8211CBA
0oC to +70oC
8 Lead SOlC (N)
ICL8211CTY
• Fixed Value Constant Current Source
0
oC
to
+70oC
ICL8211MTY
(Note 1)
ICL8212CPA
8 Pin Metal Can
-55oC to +125oC
0oC to +70oC
oC
8 Pin Metal Can
8 Lead Plastic DIP
ICL8212CBA
0
+70oC
8 Lead SOlC (N)
ICL8212CTY
0oC to +70oC
8 Pin Metal Can
ICL8212MTY
(Note 1)
-55oC to +125oC
8 Pin Metal Can
to
NOTE:
1. Add /883B to part number if 883B processing is required
Pinouts
ICL8211 (PDIP, SOIC)
TOP VIEW
ICL8211 (CAN)
TOP VIEW
HYSTERESIS
NC
1
8
V+
HYSTERESIS
2
7
NC
THRESHOLD
3
6
NC
OUTPUT
4
5
GROUND
8
THRESHOLD
OUTPUT
1
7
2
NC
V+
6
5
3
NC
NC
4
GROUND
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002. All Rights Reserved
7-161
FN3184.2