FSBB30CH60
Motion SPM® 3 Series
Features
General Description
• UL Certified No. E209204 (UL1557)
FSBB30CH60 is a Motion SPM® 3 module providing a
fully-featured, high-performance inverter output stage
for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs
to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, over-current shutdown, and fault reporting.
The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate
inputs to the high-voltage, high-current drive signals
required to properly drive the module's internal IGBTs.
Separate negative IGBT terminals are available for each
phase to support the widest variety of control algorithms.
• 600 V - 30 A 3-Phase IGBT Inverter with Integral Gate
Drivers and Protection
• Low-Loss, Short-Circuit Rated IGBTs
• Very Low Thermal Resistance Using AlN DBC Substrate
• Dedicated Vs Pins Simplify PCB Layout
• Separate Open-Emitter Pins from Low-Side IGBTs for
Three-Phase Current Sensing
• Single-Grounded Power Supply
• Isolation Rating: 2500 Vrms / min.
Applications
• Motion Control - Home Appliance / Industrial Motor
Related Resources
• AN-9035 - Motion SPM 3 Series Ver.2 User’s Guide
Figure 1. Package Overview
Package Marking and Ordering Information
Device
Device Marking
Package
Packing Type
Quantity
FSBB30CH60
FSBB30CH60
SPMEA-027
Rail
10
©2006 Fairchild Semiconductor Corporation
FSBB30CH60 Rev. C6
1
www.fairchildsemi.com
FSBB30CH60 Motion SPM® 3 Series
January 2014
