MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
SMG
Downsized, 85℃
Series
SMQ
●Endurance
: 2,000 hours at 85℃
● Solvent resistant type except 315 to 450Vdc
(see PRECAUTIONS AND GUIDELINES)
●RoHS Compliant
Downsized
SMG
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-40 to +85℃(6.3 to 400Vdc)
Rated Voltage Range
Capacitance Tolerance
Leakage Current
-25 to +85℃(450Vdc)
6.3 to 450Vdc
±20% (M)
6.3 to 100Vdc
I=0.03CV or 4µA, whichever is greater.
≦
φ18
(at 20℃, 120Hz)
160 to 450Vdc
Time After 1minute
CV
CV≦1,000 I=0.1CV+40 max.
CV>1,000 I=0.04CV+100 max.
After 5minute
I=0.03CV+15 max.
I=0.02CV+25 max.
(at 20℃)
(at 20℃ after 3 minutes)
(at 20℃ after 1 minute)
I=0.03CV
≧
φ20
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 315 to 400V 450V
0.34 0.24 0.20 0.16 0.14 0.12 0.09 0.08
0.20
0.24
0.24
≦
φ18
tan (Max.)
δ
0.28 0.24 0.20 0.16 0.14 0.12 0.09 0.08
0.15
0.15
0.20
≧
φ20
(at 20℃, 120Hz)
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000μF increase.
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 315 to 400V 450V
≦
φ18
Z(-25℃)/Z(+20℃)
4
3
2
2
2
5
2
2
6
3
6
≧
φ20
5
4
3
2
2
2
2
2
6
6
4
≦
φ18
Z(-40℃)/Z(+20℃)
12
10
8
5
4
3
3
3
4
6
- (at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours
at 85℃.
≦±20% of the initial value
Capacitance change
D.F. (tan
δ)
≦200% of the initial specified value
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 85℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
6.3 to 100Vdc
160 to 450Vdc
Rated voltage
Capacitance change
≦±20% of the initial value
≦±20% of the initial value
≦200% of the initial specified value ≦200% of the initial specified value
D.F. (tan
δ)
≦The initial specified value
≦500% of the initial specified value
Leakage current
Dissipation Factor
(tan )
δ
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
◆DIMENSIONS [mm]
F±0.5
Sleeve (PET : Black)
F±0.5
Code : E
φD'
φ5 to φ18
φd
● Terminal
15min.
L'
Vent
(except φ5)
4min.
(φ5 to φ10)
(φ12.5 to φ18)
φD'
φd
Sleeve (PET : Black)
≧φ20
F±0.5
Gas escape end seal
L'
Vent
4min.
15min.
5
φD
φd 0.5
2.0
F
φD'
L'
6.3
0.5
2.5
10 12.5
8
0.6 0.6 0.6
3.5 5.0 5.0
φD+0.5max.
L+1.5max.
16
0.8
7.5
22
18 20
0.8 1.0 1.0
7.5 10.0 10.0
φD+0.5max.
L+2.0max.
◆PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
E S MG A A A E A A A A A M A A A N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 1.0µF:1R0,10µF:100,100µF:101)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3,100V:101,315V:3B1)
Series code
Category
Please refer to "Product code guide
(radial lead type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
(1/4)
CAT. No. E1001M
