P
www.vishay.com
Vishay Sfernice
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
FEATURES
• Load life stability at ± 70 °C for 2000 h:
0.1 % under Pn/0.05 % under Pd
• Low temperature coefficient down to 5 ppm/°C
(- 55 °C; + 155 °C)
• Very low noise < - 35 dB and voltage coefficient
< 0.01 ppm/V
• Wide resistance range: 10 to 76 M
depending on size
• Tolerances to ± 0.01 %
• In lot tracking 5 ppm/°C
• Termination: Thin film technology
• Short circuits (jumpers) r < 50 mR, I < 2 A, see PZR
datasheet (www.vishay.com/doc?53053)
• Withstand moisture resistance test of AEC-Q200
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
For low noise and precision applications, superior stability,
low temperature coefficient of resistance, and low voltage
coefficient, Vishay Sfernice’s proven precision thin film
wraparound
resistors
exceed
requirements
of
MIL-PRF-55342G characteristics Y ± 10 ppm/°C (- 55 °C;
+ 155 °C) down to ± 5 ppm/°C (- 55 °C; + 155 °C).
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
STANDARD ELECTRICAL SPECIFICATIONS
RATED
POWER
W
Pn (1)
RATED
POWER
W
Pd (1)
LIMITING
ELEMENT
VOLTAGE
V
TOLERANCE
±%
TEMPERATURE
COEFFICIENT
± ppm/°C
MODEL
SIZE
RESISTANCE
RANGE (2)
()
P0302
0302
10 to 750K
0.040
0.030
25
0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5
5, 10, 25, 50, 100
P0402
0402
10 to 1.5M
0.063
0.040
50
0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5
5, 10, 25, 50, 100
P0505
0505
10 to 4M
0.125
0.050
50
0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5
5, 10, 25, 50, 100
P0603
0603
10 to 3.2M
0.125
0.100
75
0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5
5, 10, 25, 50, 100
P0805 (3)
0805
10 to 10M
0.200
0.125
150
0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5
5, 10, 25, 50, 100
P1005
1005
10 to 8.1M
0.250
0.125
75
0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5
5, 10, 25, 50, 100
P1206
1206
10 to 35M
0.330
0.250
200
0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5
5, 10, 25, 50, 100
P1505
1505
10 to 15M
0.350
0.175
75
0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5
5, 10, 25, 50, 100
P2010
2010
10 to 76M
1
0.500
300
0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5
5, 10, 25, 50, 100
Notes
• Case size 2512 under development. Please consult Vishay Sfernice.
(1) Pn = Nominal power - Pd = Derated power intended to improve stability.
(2) For ohmic range versus tolerance and TCR see detailed table on next page.
(3) Model P0805 being same size than case 0705 with same performances, only codification of P0805 remains.
CLIMATIC SPECIFICATIONS
MECHANICAL SPECIFICATIONS
Operating temperature
range
Substrate
Alumina
Technology
Thin film
Note
• For temperature up to 230
(www.vishay.com/doc?53050)
- 55 °C; + 155 °C
°C,
see
PHT
datasheet
Film
Protection
Nickel chromium with mineral
passivation or CrSi
Silicone
B type: SnPb over nickel barrier for
solder reflow
Terminations
N type: SnAg over nickel barrier
G type: gold over nickel barrierfor
other applications
Revision: 02-Mar-12
Document Number: 53017
1
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000