AX88796BLF / AX88796BLI Low-pin-count Non-PCI 8/16-bit 10/100M Fast Ethernet Controller Features High-performance non-PCI local bus Support both 8 bit and 16 bit local CPU interfaces include MCS-51 series, 80186 series CPU and ISA bus SRAM-like host interface (US Patent Approval), easily interfaced to most common embedded MCUs Embed 8Kx16 bits SRAM for packet buffers Support Slave-DMA to minimize CPU overhead Support burst-mode read for highest performance applications Interrupt pin with programmable Hold-off timer Single-chip Fast Ethernet controller Compatible with IEEE802.3, 802.3u standards Integrate Fast Ethernet MAC/PHY transceiver in one chip Support 10Mbps and 100Mbps data rate Support full and half duplex operations Support 10/100Mbps N-way Auto-negotiation operation Support twisted pair crossover detection and auto-correction (HP Auto-MDIX) Support IEEE 802.3x flow control for full-duplex operation Document No.: AX88796B_115/01/13/12 Support back-pressure flow control for half-duplex operation Support VLAN match filter Support Wake-on-LAN function to reduce power by following events Detection of a change in the network link state Receipt of a Magic Packet Receipt of a MS wakeup frame NE2000 register level compatible instruction Performance can be enhanced with only a minor host driver modification from original NE2000 driver Support EEPROM interface to store MAC address (Optional) Support up to 2 (out) /1 (in/out) General Purpose pins Support LED pins for various network activity indications Integrate voltage regulator and 25MHz crystal oscillator 0.18um CMOS process. 3.3V power supply with 5V tolerance I/O pins 64-pin LQFP , RoHS package Operate over 0 to +70 C or -40 to +85 C temperature range Product description The AX88796B is a low-pin-count (64-pin LQFP) non-PCI Ethernet controller for the Embedded and Industrial Ethernet applications. The AX88796B supports 8/16-bit SRAM-like host interface, providing a glue-less connection to most common embedded MCUs. The AX88796B integrates on-chip Fast Ethernet MAC and PHY, which is IEEE802.3 10Base-T and IEEE802.3u 100Base-TX compatible, and 8Kx16 bits embedded SRAM for packet buffering to accommodate high bandwidth applications. The AX88796B has a wide array of features including support for Twisted Pair Crossover Detection and Auto-Correction, Wake-on-LAN power management, and IEEE 802.3x and back-pressure flow control. The AX88796B supports two operating temperature ranges, namely, commercial grade from 0 to 70 C and industrial grade from –40 to 85 C. The small form factor of 64-pin LQFP package helps reduce the overall PCB space. The programming of AX88796B is simple and compatible with NE2000, so the users don‟t need any modification and can easily port the software drivers to many embedded systems very quickly. Combining these features with ASIX‟s free TCP/IP software stack for 8-bit microcontrollers, AX88796B provides the best Ethernet solution for embedded networking applications. System Block Diagram 51 series / 186 bus series / ISA bus General processor 8bit / 16bit Non-PCI bus Address Bus CSn RDn / WRn Data Bus AX88796B With 10/100 Mbps PHY ASIX ELECTRONICS CORPORATION Interrupt AX88796B With 10/100 Mbps PHY First Released Date: 2006 / 03 / 01 4F, NO.8, HSIN ANN Rd., Science-based Industrial Park, Hsin-Chu City, Taiwan, R.O.C. TEL: 886-3-579-9500 FAX: 886-3-579-9558 http://www.asix.com.tw




ASIX Electronics Corporation






Not pic File

Hot Offer


型式 数量 D/C・lead 備考 選択
AX88796L 1128個 14+RoHS  


型式 数量 D/C・lead 備考 選択
AX88796L 1328個    



見積依頼→在庫確認→見積回答→注文→検収→支払 となります。

AX88796Lの取扱い販売会社 株式会社クレバーテック  会社情報(PDF)    戻る