CC6
Vishay Electro-Films
CHIP
RESISTORS
Thin Film 0304 Size Resistor on Alumina
FEATURES
• Wire bondable
• Chip size: 0.030 x 0.045 inches
Product may not
be to scale
• Resistance range: 20 Ω to 59 kΩ
• Alumina substrate
• Low stray capacitance: < 0.2 pF
The CC6 series single-value resistor chips offer a small size,
low shunt capacitance and solder pad option.
The CC6s nichrome resistor material offers excellent
stability.
The CC6s are manufactured using Vishay Electro-Films
(EFI) sophisticated thin film equipment and manufacturing
technology. The CC6s are 100 % electrically tested and
visually inspected to MIL-STD-883.
• Resistor material: Nichrome
• Resistor passivation coat optional
• Tolerances to 0.05 %
• Solder pad optional
APPLICATIONS
Vishay EFI CC6 chip resistors provide excellent high-frequency response and are ideally suited for prototyping.
Typical application areas are:
• Amplifiers
• Couplers
• Oscillators
• Filters
• Attenuators
Recommended for hermetic applications where die is not exposed to moisture.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES AND TOLERANCES
Tightest Standard Tolerance Available
0.1 %
0.05 %
± 10 ppm/°C
± 25 ppm/°C
± 50 ppm/°C
± 100 ppm/°C
20 Ω
75 Ω 100 Ω
30 kΩ
59 kΩ
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-202, Method 308
- 20 dB typ.
Moisture Resistance, MIL-STD-202
Method 106 - Hermetic Applications
± 0.2 % max. ΔR/R
Stability, 1000 h, + 125 °C, 65 mW
± 0.1 % max. ΔR/R
Operating Temperature Range
- 55 °C to + 125 °C
Thermal Shock, MIL-STD-202,
Method 107, Test Condition F
± 0.25 % max. ΔR/R
High Temperature Exposure, + 150 °C, 100 h
± 0.1 % max. ΔR/R
Dielectric Voltage Breakdown
400 V
1012 min.
Insulation Resistance
Operating Voltage
100 V max.
DC Power Rating at + 125 °C (Derated to Zero at + 150 °C)
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
www.vishay.com
32
For technical questions, contact: efi@vishay.com
65 mW max.
± 0.25 % max. ΔR/R
Document Number: 61006
Revision: 10-Mar-08
