Crimp
1.5mm
ZH CONNECTOR
Emboss Tape
Disconnectable Crimp style connectors
(.059") pitch
Features –––––––––––––––––––––––
• Compact, low profile design
The ZH connector requires only about 45% of the installation
space required by the standard JST 2.0mm (.079") pitch
connector.
• Housing lances
The contact retention lances on the resilient housing allow
visual confirmation of contact lock-in for easy and secure
insertion.
• Reliable contact construction
The dimple at the center of the contact ensures positive
contact and low contact resistance at all times, even when the
connector is subjected to vibration or distortion. Therefore this
connector is ideal for use under low current, low voltage
conditions.
The ZH connector is very small with a
mounting height of 5.6mm (.220") and a
thickness of only 3.5mm (.138"). Contact
retention lances on the housing make
insertion easier, while the dimple at the
center of the contact ensures reliable
contact with the post.
• Distortion resistant construction
The header is fully shrouded and thus protects the receptacle
from damage that could be caused by mating the connectors
at an angle or by otherwise mismating the connectors.
• Compatible with the ZR insulation displacement connectors
The same shrouded header can be used for either the ZR IDCstyle connector or the ZH crimp style connector. This allows
both types of connector to be used interchangeably without
replacing the header.
Specifications ––––––––––––––––––
• Current rating: 1.0A AC, DC (AWG #26)
• Voltage rating: 50V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/20m Ω max.
After environmental testing/30m Ω max.
• Insulation resistance:
500M Ω min.
• Withstanding voltage: 500V AC/minute
• Applicable wire: AWG #32 to #26
• Applicable PC board thickness: 0.6 to 1.2mm(.024" to .047"),
1.6mm(.063")
* Contact JST for details.
Standards –––––––––––––––––––––
0
1
2
Recognized E60389
Certified LR20812
R9351092
11
