Thick Film Power Resistors
Type BDS100 Series
Characteristics Electrical
Resistance Range:
Resistance Tolerance:
TCR:
R47 - 1MO
± 10%, 5% (Tighter by discussion)
R<1Ω
± 250ppm/°C
R>1Ω
± 150ppm/°C
Heatsink: 115°C / 100°C / 60°C
25W / 50W / 100W
Parallel
15pF
To Earth
40pF
40nH (Maximum)
(100W or Less)
500Vdc/ac rms
(Terminal to Heatsink)
2.5kVac rms
1.5/50ms
4kV
(at 500V dc)
>100GΩ
at 2kV
<10pC
Although the use of proprietary heat sinks with lower thermal resistance is
acceptable, up rating is not recommended. The use of proprietary heat sink
compound to improve thermal conductivity is essential.
Rated Power:
Capacitance:
Key Features
100W in a 9.5cm2 footprint
• Gives an impressive
power density of
10.5W/cm2
I
Virtually inductance-free
• Inductance < 40nH
I
Wide resistance range:
0.47Ω to 1MΩ
• Coupled with 1%
tolerance gives ultimate
design flexibility
I
Terminal Size:
Terminal Torque (max.):
Creepage Distance:
Clearance:
M4
1.3Nm
10mm
10mm
3mm
< 6µm
0.05mm
35g
Terminal to Heatsink
Terminal to Terminal
Ra
Heatsink Surface Finish:
Heatsink Flatness:
Weight:
Dimensions
M4 Nuts
15.5 ±0.2
M4 Nuts
37.8 ±0.2
30 ±0.15
4
37.8 ±0.2
30 ±0.15
15.5 ±0.2
4
3
1
ø4.2
2
15 ±0.2
3
ø4.2
ø4.2
4.5 ±0.2
1
2
15 ±0.2
3.8 ±0.2
3.8 ±0.2
4.5 ±0.2
Applications
I
I
I
Literature No. 1773308
Issued: 02-06
∆R 0.25% Typ
∆R 0.25% Typ
∆R 0.25% Typ
Characteristics Mechanical
Multiple terminal
configurations and
multi-resistor packages
• The space saving
solution
Partial discharge
<10pC at 2kV
• Guaranteeing quality,
reliability and long life
∆R 0.25% Typ
∆R 0.25% Typ (I.R.>10GΩ)
∆R 0.25% Typ
2000cyc. at PRated
56 Days, 40°C, 95% RH
-55°C to +125°C, 5cycles
-55°C to +125°C
3 x PRated (10s)
10/500Hz
40g 4000 bumps
12 ±0.2
I
Endurance (Rated Power):
Humidity Load Life:
Temperature Cycling:
Operating Storage Temp:
Short Term Overload:
Vibration:
Bump:
25.4 ±0.2
I
Characteristics Environmental
12 ±0.2
With less than 40nH inductance and
a 100Watt power rating in an
easy-mounting 38mm x 25mm Isotop
case, the BDS100 offers high power
density over a wide range of ohmic
values (R47 – 1M0) and benefits from
10 years experience in the field.
Available in 6 resistor configurations
with 2 or 4 easy to connect terminals,
the resistors are made from quality
materials for optimum reliability and
stability with very low partial discharge.
Tyco can test resistors to conform to
relevant customer specifications,
and will advise on the use of resistors
for pulse energy and high voltage
applications (HV designs available).
Resistors
with
alternative
terminations or flying leads are
available, and custom designs are
welcome.
This product is available via
distribution.
Series Inductance:
Limiting Element Voltage:
Isolating Voltage:
Single Shot Voltage:
Insulation Resistance:
Partial Discharge:
Heat Dissipation:
25.4 ±0.2
Type BDS100 Series
Snubbing (Low inductance)
Balancing Resistor
(Multi-resistor package)
Filter (Low inductance)
Dimensions are shown for
reference purposes only.
I
I
High Voltage
High Frequency
Dimensions are in millimetres
unless otherwise specified.
Specifications subject to
change.
www.tycoelectronics.com
passives.tycoelectronics.com