MOTOROLA
Order this document
by MJE13007/D
SEMICONDUCTOR TECHNICAL DATA
MJE13007
MJF13007
Designer's Data Sheet
SWITCHMODE™
NPN Bipolar Power Transistor
For Switching Power Supply Applications
The MJE/MJF13007 is designed for high–voltage, high–speed power switching
inductive circuits where fall time is critical. It is particularly suited for 115 and 220 V
switchmode applications such as Switching Regulators, Inverters, Motor Controls,
Solenoid/Relay drivers and Deflection circuits.
•
•
•
•
•
•
POWER TRANSISTOR
8.0 AMPERES
400 VOLTS
80/40 WATTS
VCEO(sus) 400 V
Reverse Bias SOA with Inductive Loads @ TC = 100°C
700 V Blocking Capability
SOA and Switching Applications Information
Two Package Choices: Standard TO–220 or Isolated TO–220
MJF13007 is UL Recognized to 3500 VRMS, File #E69369
MAXIMUM RATINGS
Rating
Symbol
MJE13007
MJF13007
Unit
Collector–Emitter Sustaining Voltage
VCEO
400
Vdc
Collector–Emitter Breakdown Voltage
VCES
700
Vdc
Emitter–Base Voltage
VEBO
9.0
Vdc
Collector Current — Continuous
Collector Current — Peak (1)
IC
ICM
8.0
16
Adc
Base Current — Continuous
Base Current — Peak (1)
IB
IBM
4.0
8.0
Adc
Emitter Current — Continuous
Emitter Current — Peak (1)
IE
IEM
12
24
Adc
RMS Isolation Voltage
(for 1 sec, R.H. < 30%, TA = 25°C)
Test No. 1 Per Fig. 15
Test No. 2 Per Fig. 16
Test No. 3 Per Fig. 17
Proper strike and creepage distance must
be provided
Total Device Dissipation @ TC = 25°C
Derate above 25°C
Operating and Storage Temperature
VISOL
V
—
—
—
80
0.64
PD
TJ, Tstg
4500
3500
1500
40*
0.32
– 65 to 150
CASE 221A–06
TO–220AB
MJE13007
Watts
W/°C
°C
THERMAL CHARACTERISTICS
Thermal Resistance
— Junction to Case
— Junction to Ambient
Maximum Lead Temperature for Soldering
Purposes: 1/8″ from Case for 5 Seconds
RθJC
RθJA
°1.56°
°62.5°
TL
°3.12°
°62.5°
260
°C/W
°C
CASE 221D–02
ISOLATED TO–220 TYPE
UL RECOGNIZED
MJF13007
(1) Pulse Test: Pulse Width = 5.0 ms, Duty Cycle ≤ 10%.
*Measurement made with thermocouple contacting the bottom insulated mountign surface of the
*package (in a location beneath the die), the device mounted on a heatsink with thermal grease applied
*at a mounting torque of 6 to 8•lbs.
Designer’s Data for “Worst Case” Conditions — The Designer’s Data Sheet permits the design of most circuits entirely from the information presented. SOA Limit
curves — representing boundaries on device characteristics — are given to facilitate “worst case” design.
Designer’s and SWITCHMODE are trademarks of Motorola, Inc.
© Motorola, Inc. 1995
Motorola Bipolar Power Transistor Device Data
1
