RT9010
300mA LDO Regulator with POR
General Description
RT9010 is a low noise, and low dropout with the sourcing
ability up to 300mA and power-on reset function. The range
of output voltage is from 1.2V to 3.6V by operating from
2.5V to 5.5V input.
RT9010 offers 2% accuracy, extremely low dropout voltage
(240mV @ 300mA), and extremely low ground current.
The shutdown current is near zero current which is suitable
for battery-power devices. Other features include current
limiting, over temperature, output short circuit protection.
RT9010 is short circuit thermal folded back protected.
RT9010 lowers its OTP trip point from 165°C to 110°C
when output short circuit occurs (VOUT < 0.4V) providing
maximum safety to end users.
RT9010 can operate stably with very small ceramic output
capacitors, reducing required board space and component
cost. RT9010 is available in fixed output voltages in the
TSOT-23-6 package.
Ordering Information
RT9010Package Type
J6 : TSOT-23-6
Lead Plating System
P : Pb Free
G : Green (Halogen Free and Pb Free)
Output Voltage
12 : 1.20V
13 : 1.30V
:
:
35 : 3.50V
36 : 3.60V
1H : 1.85V
2F : 2.65V
2H : 2.85V
Note :
Richtek products are :
RoHS compliant and compatible with the current require-
Features
Wide Operating Voltage Ranges : 2.5V to 5.5V
Low-Noise for RF Application
No Noise Bypass Capacitor Required
Fast Response in Line/Load Transient
TTL-Logic-Controlled Shutdown Input
Low Temperature Coefficient
300mA LDO Outputs
High Accuracy ±2%
Short Circuit Protection
Thermal Shutdown Protection
Current Limit Protection
Short Circuit Thermal Folded Back Protection
Tiny TSOT-23-6 Package
RoHS Compliant and 100% Lead (Pb)-Free
Applications
CDMA/GSM Cellular Handsets
Battery-Powered Equipment
Laptop, Palmtops, Notebook Computers
Hand-Held Instruments
PCMCIA Cards
Portable Information Appliances
Pin Configurations
(TOP VIEW)
VIN
6
EN SET
5
4
2
3
VOUT GND POR
TSOT-23-6
Marking Information
For marking information, contact our sales representative
directly or through a Richtek distributor located in your
area.
ments of IPC/JEDEC J-STD-020.
Suitable for use in SnPb or Pb-free soldering processes.
DS9010-05 April 2011
www.richtek.com
1