SW-442
GaAs SPDT Terminated Switch
DC - 3.0 GHz
Features
•
•
•
•
•
•
Low Insertion Loss: 0.5 dB typical up to 1 GHz
High Isolation: > 38 dB @ 900 MHz
Low Power Consumption: < 10µA @ -3 V
Positive or Negative 2.5 to 8 V Control
Low cost SOT-26 Package
Available in a lead free version: MASW-007935
M/A-COM Products
Rev. V4
Functional Schematic
Positive Control Voltage
Description
M/A-COM’s SW-442 is a GaAs monolithic switch in
a low cost SOT-26 surface mount plastic package.
The SW-442 is ideally suited for applications where
very low power consumption, low insertion loss and
very small size are required.
Typical application is in dual band systems which
require switching between small signal components
such as filter banks, single band LNA's, converters
etc. The SW-442 can be used in applications up to
0.25 Watts in systems such as CDMA, W-CDMA,
PCS, DCS1800, GSM and other analog/digital
wireless communications systems.
Functional Schematic
Negative Control Voltage
The SW-442 is fabricated using a mature 0.5 micron
GaAs PHEMT process. The process features full
passivation for increased performance and
reliability.
Ordering Information 1,2
Part Number
Package
SW-442-PIN
Bulk Packaging
SW-442TR
1000 piece reel
SW-442SMB
Sample Board
DC - 3.0 GHz tuning
Pin Configuration
Pin No.
Function
Description
1
RF1
RF Input/Output
2
GND
RF Ground
3
RF2
RF Input/Output
4
V2
V Control 2
5
RFC
RF Common
6
V1
V Control 1
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for
• North America Tel: 800.366.2266 / Fax: 978.366.2266
development. Performance is based on target specifications, simulated results, and/or prototype
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information.
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
volume is not guaranteed.
information contained herein without notice.