ST2378E
8-bit dual supply 1.71 to 5.5 V level translator with I/O VCC ± 15 KV
ESD protection
Datasheet − production data
Features
■
High speed
– tPD = 15 ns (max.) at TA = 85 °C
– VL = 1.8 V
– VCC = 5.5 V
■
Guaranteed data rate
– 13 Mbps (1.8 V ≤ VL ≤ VCC ≤ 5.5 V)
■
Flip-Chip20
Low power dissipation
– ITS-VL = ITS-VCC = 1μA (max.) at TA = 85 °C
– IQVL = 100 μA (max.) at TA = 85 °C
– IQCC = 10μA (max.) at TA = 85 °C
■
Output impedance
– |IOHA| = 20 μA (min.) at VL = 1.8 V; VCC = 5.5 V
– IOLA = 1.0 μA (min.) at VL = 1.8 V; VCC = 5.5 V
■
Bidirectional level translation
■
Totem pole and open drain driving for I2C
communications
■
5 V tolerant on enable pin
■
Wide operating voltage range
– VL (opr.) = 1.71 V to VCC
– VCC (opr.) = 1.71 V to 5.5 V
■
ESD performance
■
HBM > 15 KV ESD protection on I/OVCC lines
■
Lead-free Flip-Chip and TSSOP package
TSSOP20
Description
The ST2378E device is an 8-bit, dual supply,
bidirectional level translator with ±15 kV ESD
protection on I/Os at VCC side. It is designed to
interface data transfer between low voltage
ASICs/PLDs and higher voltage systems.
Externally applied voltage, VCC and VL, set logic
levels at both sides with range specified as
1.71 V ≤ VL ≤ 5.5 V and VL ≤ VCC ≤ 5.5 V.
For proper operation, VCC should be set higher
than VL.
Utilizing a transmission-gate-based design, this
device allows bidirectional asynchronous data
transfer, which means each channel is allowed to
have either VCC to VL or VL to VCC data transfer
direction independently and no direction pin is
required. The ST2378E device operates at
guaranteed data rate of 13 Mbps over the entire
specified operating voltage range.
Among the other features there is included the
OE pin which allows disable mode operation
whereby current consumption is reduced to less
than 1 µA.
September 2012
This is information on a product in full production.
Doc ID 9489 Rev 2
1/20
www.st.com
20