SSW-1XX-XX-XXX-X-XX-XXX-XX
REVISION BS
No OF POSITIONS
-01 THRU -50
(-P OPTION: 36 POS MAX)
DO NOT
SCALE FROM
THIS PRINT
LEAD STYLE
(SEE TABLE 1)
-01 THRU -06 (STD. INS. FORCE)
-21 THRU -24 (LOW INS. FORCE)
OPTION
-LL: LOCKING LEAD
(SEE FIG 4, SHEET 2)
(N/A IN SINGLE ROW,
1 & 2 POSITION)
POLARIZING OPTION
INDICATE POS, SEE FIG 3, SHEET 2
OPTION
-RA: RIGHT ANGLE (SEE FIG 2, SHEET 2)
PLATING SPECIFICATION
(STYLE -01 & -21 N/A)
BS -G: 20µ" GOLD IN CONTACT AREA,
-N: NOTCH (SEE FIG 6, SHEET 3)
(ONLY AVAILABLE IN -D ROW)
3µ" GOLD ON TAIL
(ONLY AVAILABLE IN 5, 7, 8, 10, 12,
-T: MATTE TIN CONTACT AND TAIL
13, 15, 17, 20, 25, 32, 36 POSITIONS)
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
(USE NSW-XX-D-N-XX BODY,
MATTE TIN ON TAIL
SEE TABLE 6)
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
ROW SPECIFICATION
-E: 50µ" EXTRA HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-S: SINGLE
(CONTACT -01 & -02 STRAIGHT ONLY)
-D: DOUBLE
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,
-T: TRIPLE
MATTE TIN ON TAIL
-P: SINGLE
-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA,
-Q: TRIPLE WITH ONLY OUTER 2 ROWS
TIN/LEAD (90/10 ± 5%) TAIL
FILLED
-TL: TIN/LEAD (90/10 ± 5%) CONTACT AND TAIL
(AVAILABLE ONLY ON LEAD STYLES -01)
-TM: MATTE TIN CONTACT AND TAIL (CONTACT -21 THRU -24 N/A)
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-FM: 3µ" FLASH GOLD SELECTIVE IN CONTACT AREA,
MATTE TIN ON TAIL
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
.095 2.41
REF
((No. OF POS x .10[2.5]) + .02[0.5])
SEE NOTE 10
60°
DETAIL 'A'
SCALE 4 : 1
BS
*"B"
C
'A'
.100 2.54
.100 2.54
SEE NOTE 5
NOTES:
.295 7.49
REF
SEE NOTE 8
.335 8.51
REF
.0110 0.280
REF
.245 6.22
REF
.195 4.95
REF
.095 2.41
REF
.050 1.27
REF
.031 0.79 X .016[0.41]
REF (TYP)
*
-D
-P
-S
+.000
"B" - .005
FOR MACHINE FILL ONLY
1. C REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM CUT FLASH: .015[.38] WITH NO FLASH BELOW STANDOFFS OR IN CONTACT HOLES.
3. MINIMUM CONTACT PUSHOUT FORCE: 1.5 LBS.
4. MAXIMUM ALLOWABLE BOW: .003[.08] INCH/INCH.
5. MAXIMUM ALLOWABLE SWAY: 2° (TYP) FOR HAND FILL & 1° (TYP) FOR MACHINE FILL.
6. MAXIMUM ALLOWABLE VARIATION BETWEEN ROWS: .010[.25].
7. "END WALLS" AFTER CUTTING SHOULD BE .020±.003 [.51±.08].
8. NOTCH ON -P-RA & -D-RA-N OPTIONS TO BE ORIENTED AS SHOWN.
9. SHEAR LOCATION TO BE WITHIN .001[.03] OF THE BREAK OFF CENTER LOCATION.
10. SHEAR LOCATION TO BE WITHIN .001[.03] OF THE BREAK OFF CENTER LOCATION FOR MACHINE FILL.
11. LEAD STYLE X2 (SINGLE AND DOUBLE) -RA's TO BE LAYER PACKAGED. ALL OTHER -RA LEAD STYLES:
UNDER 5 POSITION TO BE LAYER PACKAGED, 5 AND UP TO BE PACKAGED IN TUBES.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
.XX: .01 [.3]
.XXX: .005 [.13]
ANGLES
2
.200 5.08
-T
-D-N
FIG 1
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
MATERIAL:
DO NOT SCALE DRAWING
INSULATOR:
-S, -D, -D-N: VECTRA E130i, COLOR: BLACK UL94 V0
-P, -T: PCT, COLOR: BLACK UL94 V0
CONTACT: PHOSPHOR BRONZE, SPRING TEMPER
ALLOY 511 OR 510
(TENSILE STRENGTH 90-100 KSI)
(YEILD STRENGTH @ 2% OFFSET 88-98 KSI)
PER MIL-B-13501
THICKNESS: .0160±.001 [0.635±0.03]
F:\DWG\MISC\MKTG\SSW-1XX-XX-XXX-X-XX-XXX-XX-MKT.SLDDRW
SHEET SCALE: 2:1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
ASSEMBLY, SOCKET STRIP .016 X .031 TAIL
DWG. NO.
SSW-1XX-XX-XXX-X-XX-XXX-XX
BY: PURVIS
06/12/1987
SHEET 1 OF 3
