FUJITSU TAKAMISAWA
CONNECTOR CATALOG
MEMORY CARD CONNECTORS
(JEIDA/PCMCIA CONFORMABLE)
560H SERIES
s FEATURES
• The connectors conform to the Japan Electronic Industry
Development Association (JEIDA) and Personal
Computer Memory Card International Association
(PCMCIA) standards Ver. 4.
• Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.).
Incorrect insertion is prevented. Hot system plugging is
possible (contact detection).
• Plugs have an easy-to-use ejection mechanism.
• Raised mounting type connectors (under which
components can be mounted) and low-profile connectors
are available.
• In addition to connectors for type I and type II cards, a
connector for type III cards has been provided.
• The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided
mounting are available.
s PIN CONNECTOR (PLUG) CONTACT LENGTH
s SPECIFICATIONS
Specification
Item
Contact type
Pin No.
Contact length
Operating temperature range
– 55°C to + 85°C
Power, ground pins 1, 17, 34, 35, 51, 68
Current rating
DC 0.5 A
Card detection pins
36, 67
3.5 mm (0.137 in.)
Voltage rating
AC 250 V
Other signal pins
Others
4.25 mm (0.167 in.)
Contact resistance
40 mΩ max (6 VDC, 0.1 A)
Insulation resistance
1000 MΩ min. (500 VDC)
Dielectric withstanding voltage
500 VAC for 1 minute
Insertion/withdrawal life
Industrial environment: 5,000 times
Office environment: 10,000 times
5.0 mm (0.196 in.)
s MATERIALS
Specification
Item
Plug body: PPS resin
Insulating material
: 6T nylon (for type III card connector)
Ejector: Polyester
: PPS resin (for SMT and type III card connectors)
Conductor
Copper alloy
Plating
Contact: Gold over palladium over nickel
(PAGOS)
Terminal: Palladium
1
