HOME＞在庫検索＞在庫情報
40FLZ-RSM1-R-TB
FLZ CONNECTOR 0.5mm Emboss Tape Connectors for FFC and FPC (.020") pitch Features–––––––––––––––––––––––– • Zero insertion force mechanism A ZIF mechanism increases wear resistance and extends the connector's mating life. • Heat resistant design suitable for surface mounting This housing is made of heat resistant plastic to allow reflow soldering. • In-line surface mount tails Has an in-line surface mount tails for easy inspection. • Two types of connections The connector is available in either the normal or reverse configurations. The FFC/FPC is positioned with its mating surfaces facing upward for the normal configured connector, while the reverse configuration requires that the FFC/FPC be positioned with its mating surfaces facing down. The engineer This extremely small 0.5mm (.020") pitch connector with a height of only 2.0mm (.079") above the PCB surface allows interconnection in extremely small spaces and is an example of JST's leading edge technology. has greater freedom in designing his circuitry. • Embossed tape for automatic mounting The FLZ connector can be packaged in embossed tape for automatic mounting. Specifications ––––––––––––––––––– • Current rating: 0.5A AC, DC • Voltage rating: 50V AC, DC • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/40m Ω max. After environmental testing/60m Ω max. • Insulation resistance: 800M Ω min. • Withstanding voltage: 200V AC/minute • Applicable FFC and FPC: Lead pitch/0.5mm(.020") Lead width/0.35mm(.014") Mating part thickness/ 0.30±0.03mm(.012" ± .001") FFC and FPC to be actually used should be checked for applicability. HJ ST * Contact JST if Lead-Free product is required. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards –––––––––––––––––––––– 0 Recognized E60389 1 Certified LR20812 492
宅配業者の代金引換又は商品到着後一週間以内の銀行振込となります。
