ispLSI 1032EA
®
In-System Programmable High Density PLD
Features
Functional Block Diagram
• HIGH DENSITY PROGRAMMABLE LOGIC
— 6000 PLD Gates
— 64 I/O Pins, Four Dedicated Inputs
— 192 Registers
— High Speed Global Interconnect
— Wide Input Gating for Fast Counters, State
Machines, Address Decoders, etc.
— Small Logic Block Size for Random Logic
— Functionally Compatible with ispLSI 1032E
• NEW FEATURES
— 100% IEEE 1149.1 Boundary Scan Testable
— ispJTAG™ In-System Programmable via IEEE 1149.1
(JTAG) Test Access Port
— User Selectable 3.3V or 5V I/O Supports MixedVoltage Systems (VCCIO Pin)
— Open-Drain Output Option
D7 D6 D5 D4 D3 D2 D1 D0
A0
C7
A2
C5
D Q
Logic
Array
A3
D Q
GLB
A4
C3
D Q
A5
A6
A7
C4
Global Routing Pool (GRP)
B0 B1 B2 B3 B4 B5 B6 B7
C2
C1
Output Routing Pool
C6
EW
Output Routing Pool
D Q
A1
N
E2CMOS®
Output Routing Pool
C0
CLK
Output Routing Pool
M
AC
5V
H
D 4
ES A
IG 5 F
N O
S R
• HIGH PERFORMANCE
TECHNOLOGY
— fmax = 200 MHz Maximum Operating Frequency
— tpd = 4.5 ns Propagation Delay
— TTL Compatible Inputs and Outputs
— Electrically Erasable and Reprogrammable
— Non-Volatile
— 100% Tested at Time of Manufacture
— Unused Product Term Shutdown Saves Power
• IN-SYSTEM PROGRAMMABLE
— Increased Manufacturing Yields, Reduced Time-toMarket and Improved Product Quality
— Reprogram Soldered Devices for Faster Prototyping
0139A/1032EA
Description
The ispLSI 1032EA is a High Density Programmable
Logic Device containing 192 Registers, 64 Universal I/O
pins, four Dedicated Input pins, four Dedicated Clock
Input pins and a Global Routing Pool (GRP). The GRP
provides complete interconnectivity between all of these
elements. The ispLSI 1032EA features 5V in-system
programmability (ISP™) and in-system diagnostic capabilities via IEEE 1149.1 Test Access Port. The ispLSI
1032EA device offers non-volatile reprogrammability of
the logic, as well as the interconnects to provide truly
reconfigurable systems. A functional superset of the
ispLSI 1032 architecture, the ispLSI 1032EA device adds
user selectable 3.3V or 5V I/O and open-drain output
options.
is
p
• OFFERS THE EASE OF USE AND FAST SYSTEM
SPEED OF PLDs WITH THE DENSITY AND FLEXIBILITY
OF FIELD PROGRAMMABLE GATE ARRAYS
— Complete Programmable Device Can Combine Glue
Logic and Structured Designs
— Enhanced Pin Locking Capability
— Four Dedicated Clock Input Pins
— Synchronous and Asynchronous Clocks
— Programmable Output Slew Rate Control to
Minimize Switching Noise
— Flexible Pin Placement
— Optimized Global Routing Pool Provides Global
Interconnectivity
U
SE
The basic unit of logic on the ispLSI 1032EA device is the
Generic Logic Block (GLB). The GLBs are labeled A0,
A1…D7 (Figure 1). There are a total of 32 GLBs in the
ispLSI 1032EA device. Each GLB has 18 inputs, a
programmable AND/OR/Exclusive OR array, and four
outputs which can be configured to be either combinatorial or registered. Inputs to the GLB come from the GRP
and dedicated inputs. All of the GLB outputs are brought
back into the GRP so that they can be connected to the
inputs of any other GLB on the device.
Copyright © 2002 Lattice Semiconductor Corp. All brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject
to change without notice.
LATTICE SEMICONDUCTOR CORP., 5555 Northeast Moore Ct., Hillsboro, Oregon 97124, U.S.A.
Tel. (503) 268-8000; 1-800-LATTICE; FAX (503) 268-8556; http://www.latticesemi.com
1032ea_04
1
January 2002
