Sample &
Buy
Product
Folder
Support &
Community
Tools &
Software
Technical
Documents
TLC59213, TLC59213A
SLVS867B – MAY 2009 – REVISED AUGUST 2015
TLC59213x 8-Bit Parallel In and Out Darlington Source Driver With Latch
1 Features
3 Description
•
The TLC59213 and TLC59213A are 8-bit source
drivers with input latch with CLK input and CLR to set
the output OFF. The TLC59213 and TLC59213A
have large output source currents up to 500 mA with
Darlington transistor and collectors tied to VCC. These
feature make the device optimum level of driving the
matrix of ink jet printer head, LEDs, and the scan-side
of resistor's matrix. The TLC59213 and TLC59213A
differ only in the Data Hold Time Specification (th).
1
•
•
•
•
•
•
•
•
Output Current on Each Channel
(IOUT Max = –500 mA)
VCE(sus) = 13.2 V
Input Compatible With TTL/5-V CMOS
Clear (CLR) and Clock (CLK) TTL/CMOS Control
Inputs
CLR Control Input to Off the Output
Darlington Source Driver
Clock Input Up to 1 MHz
Enhanced Hold Time (th) on TLC59213A
Temperature Range: –40°C to 85°C
The clamp diode is between output and ground for
switching inductive load.
All inputs are TTL/CMOS, which enable to any logiclevel inputs such as MCU, CPU or SN74LV594 (serial
to parallel) and the output enable LED matrix display.
It can also be used with another device sink driver
such as TLC59210, TLC59211 and TLC59212.
2 Applications
•
•
•
Lamp and Display (LED)
Hammer
Relay
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
PDIP (20)
24.33 mm × 6.35 mm
TSSOP (20)
TLC59213
TLC59213A
6.50 mm × 4.40 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Y7
Y8
D7
D8
Y6
Y5
Y4
Y3
Y2
Y1
VCC
Typical Application Diagram÷
CLK
D6
D5
D4
D3
D2
D1
CLR
TLC59213
MCU
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
