Hermetic Infrared Emitting Diode
OP130 Series
Features:
•
•
•
•
•
•
TO-46 hermetically sealed package
Focused and non-focused optical light pattern
Enhanced temperature range
Mechanically and spectrally matched to other OPTEK devices
Choice of power ranges
Choice of narrow or wide irradiance pattern
“W”
Description:
Each OP130 series device is a 935 nm gallium arsenide (GaAs) infrared LED mounted in a hermetically sealed TO
-46 package that provides an enhanced temperature range with a variety of power ranges The TO-46 housing
also offers high power dissipation and superior protection for hostile environments.
Each OP130 device has a narrow beam with an inclusive angle at half power points of 18°. Each OP130W series
device has a broad irradiance pattern of 50° at half power points, providing relatively even illumination over a large
area. These devices are designed to efficiently operate with OP800, OP593, OP598 and OP599 phototransistors
or the OP830 photodarlington.
Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
•
•
•
•
•
•
Ordering Information
Non-contact reflective object sensor
Assembly line automation
Machine automation
Machine safety
End of travel sensor
Door sensor
RoHS
Part
LED Peak
Number Wavelength
OP130
OP131
OP132
OP133
OP130W
OP131W
OP132W
OP133W
935 nm
Output Power
(mW/cm2)
Min / Max
1.0 / NA
3.0 / NA
4.0 / NA
5.0 / NA
1.0 / NA
3.0 / NA
4.0 / NA
5.0 / NA
Lens Total Beam
Type
Angle
Dome
Lead
Length
(Min)
18°
0.50"
Flat
50°
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
10/2012
Page 1 of 4
