GP1A53HRJ00F
GP1A53HRJ00F
Gap : 5mm, Slit : 0.5mm
*OPIC Output
Case package Transmissive
Photointerrupter
■ Description
■Agency approvals/Compliance
GP1A53HRJ00F is a standard, OPIC output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this
family of devices, the emitter and detector are inserted in
a case, resulting in a through-hole design.
1. Compliant with RoHS directive
■Applications
1. General purpose detection of object presence or motion.
2. Example : Printer, FAX, Optical storage unit
■ Features
1. Transmissive with OPIC output
2. Highlights:
• Vertical Slit for alternate motion detection
• Output Low Level at intercepting optical path
3. Key Parameters:
• Gap Width : 5mm
• Slit Width (detector side) : 0.5mm
• Package : 13.7×10×5.2mm
4. RoHS directive compliant
* "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signalprocessing
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1
Sheet No.: D3-A03801FEN
Date Oct. 3. 2005
© SHARP Corporation