MOTOROLA
Order this document
by PZT2222AT1/D
SEMICONDUCTOR TECHNICAL DATA
NPN Silicon Planar
Epitaxial Transistor
PZT2222AT1
Motorola Preferred Device
This NPN Silicon Epitaxial transistor is designed for use in linear and switching
applications. The device is housed in the SOT-223 package which is designed for
medium power surface mount applications.
SOT-223 PACKAGE
NPN SILICON
TRANSISTOR
SURFACE MOUNT
• PNP Complement is PZT2907AT1
• The SOT-223 package can be soldered using wave or reflow.
• SOT-223 package ensures level mounting, resulting in improved thermal
conduction, and allows visual inspection of soldered joints. The formed
leads absorb thermal stress during soldering, eliminating the possibility of
damage to the die.
• Available in 12 mm tape and reel
Use PZT2222AT1 to order the 7 inch/1000 unit reel.
Use PZT2222AT3 to order the 13 inch/4000 unit reel.
4
COLLECTOR
2, 4
1
BASE
1
2
3
CASE 318E-04, STYLE 1
TO-261AA
3
EMITTER
MAXIMUM RATINGS
Symbol
Value
Unit
Collector-Emitter Voltage
Rating
VCEO
40
Vdc
Collector-Base Voltage
VCBO
75
Vdc
Emitter-Base Voltage (Open Collector)
VEBO
6.0
Vdc
Collector Current
IC
600
mAdc
Total Power Dissipation up to TA = 25°C(1)
PD
1.5
Watts
Storage Temperature Range°
Tstg
– 65 to +150
°C
TJ
150
°C
RθJA
83.3
°C/W
TL
260
10
°C
Sec
Junction Temperature°
THERMAL CHARACTERISTICS
Thermal Resistance from Junction to Ambient
Lead Temperature for Soldering, 0.0625″ from case
Time in Solder Bath
DEVICE MARKING
P1F
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Symbol
Min
Max
Unit
Collector-Emitter Breakdown Voltage (IC = 10 mAdc, IB = 0)
V(BR)CEO
40
—
Vdc
Collector-Base Breakdown Voltage (IC = 10 µAdc, IE = 0)
V(BR)CBO
°75°
°—°
Vdc
Emitter-Base Breakdown Voltage (IE = 10 µAdc, IC = 0)
V(BR)EBO
6.0
—
Vdc
IBEX
—
20
nAdc
Collector-Emitter Cutoff Current (VCE = 60 Vdc, VBE = – 3.0 Vdc)
ICEX
—
10
nAdc
Emitter-Base Cutoff Current (VEB = 3.0 Vdc, IC = 0)
IEBO
—
100
nAdc
Characteristic
OFF CHARACTERISTICS
Base-Emitter Cutoff Current (VCE = 60 Vdc, VBE = – 3.0 Vdc)
1. Device mounted on an epoxy printed circuit board 1.575 inches x 1.575 inches x 0.059 inches; mounting pad for the collector lead min. 0.93 inches2.
Thermal Clad is a trademark of the Bergquist Company
Preferred devices are Motorola recommended choices for future use and best overall value.
REV 2
Motorola Small–Signal Transistors, FETs and Diodes Device Data
© Motorola, Inc. 1996
1