HOME在庫検索>在庫情報

部品型式

UWX1H2R2MCR1GB

製品説明
仕様・特性

ALUMINUM ELECTROLYTIC CAPACITORS WX 5.5mmL Chip Type series Chip type with 5.5mm height. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine using carrier tape. Load life of 2000 hours at 85°C. WT High Temperature WX WP Bi-polarized Smaller Specifications ZS Item Performance Characteristics Category Temperature Range – 40 ~ +85°C Rated Voltage Range 4 ~ 50V Rated Capacitance Range 0.1 ~ 330µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA) ,whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C tan δ Rated voltage (V) tan δ (MAX.) 4 6.3 10 16 25 35 50 0.35 (0.40) 0.26 (0.30) 0.20 (0.24) 0.16 (0.19) 0.14 (0.16) 0.12 (0.14) 0.12 (0.14) 6.3 4 8 4 7 15 Rated voltage (V) Z– 25°C / Z+20°C Z– 40°C / Z+20°C Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) 10 3 8 Capacitance change tan δ Within ±20% of initial value (Within ±25% for 4 V and φ3,WR series units) 200% or less of initial specified value Leakage Current After 2000 hours' application of rated voltage at 85°C, capacitors meet the characteristic requirements listed at right. Endurance Values in ( ) applicable to WR, φ3 case size. Measurement frequency : 120Hz 16 25 35 50 2 2 2 2 4 4 3 3 Initial specifed value or less Shelf Life After leaving capacitors under no load at 85°C for 1000 hours, they meet the specified value for endurance characteristics listed above. Resistance to soldering heat The capacitors shall be kept on the hot plate maintained at 250°C for 30 seconds. After removing from the hot plate and restored at room temperature, they meet the characteristic requirements listed at right. Marking Black print on the case top. Chip Type Type numbering system (Example : 16V 10µF) 5.4 1 +0.1 –0.2 0.5 ~ 0.8 2 3 4 5 6 7 8 9 10 11 12 13 14 UWX 1 C 1 0 0 MC R 1 G B A±0.2 A±0.2 B±0.2 C±0.2 0.5 MAX. Plastic platform 0.3 MAX. E 1 Voltage φD±0.5 X2 10 16V Leakage current Within ±10% of initial value Initial specified value or less Initial specified value or less Positive Capacitance 2 Lot No. Capacitance change tan δ φD A B C E 3 1.5 3.3 3.3 0.8 4 1.8 4.3 4.3 1.0 5 2.1 5.3 5.3 1.3 (mm) 6.3 8 2.4 3.3 6.6 8.3 6.6 8.3 2.2 2.3 Taping code Size code Configuration Capacitance toleranc (±20%) Rated Capacitance (10µF) Negative 1. Voltage mark for 6.3V is 6V . In case of marking for φ3 units, “V” for rated voltage is omitted. 2. In case of marking for φ3 units, Lot No.is expressed by a digit (month code). φD Code 3 2 4~8 1 Rated voltage (16V) Series name Type • The lead-free product is also available upon request. In this case, L will be put at 11th digit of type numbering system. • In the case of size φ3 in ( ),parentheses, use WX in the 2nd and 3rd digit and put a 2 in the 12th digit of type numbering system. Dimension table in next page. CAT.8100T

ブランド

NICHICON

会社名

ニチコン株式会社

本社国名

日本

事業概要

コンデンサなどの開発、製造、販売している企業である。

供給状況

 
Not pic File
データシート
pdf
Hot Offer

弊社在庫及び仕入れ先からのOffer

型式 数量 D/C・lead 備考 選択
UWX1H2R2MCR1GB 3320個 N/A N/A
UWX1H2R2MCR1GB 350個 N/A  
UWX1H2R2MCR1GB 127800個    
UWX1H2R2MCR1GB 36495個    
UWX1H2R2MCR1GB 21615個    

UWX1H2R2MCR1GBを取扱っています。

CleverTechのスタッフが市場確認を行いemailにて見積回答致します。

どれか1つを選択し「見積依頼」ボタンを押してお問合せ下さい。

ご注文方法

弊社からの見積回答メールの返信又はFAXにてお願いします。


お取引内容はこちら