The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2mm Pitch Miniature Connector for HDD
A3E Series
■Features
1. Variation in Number of Contacts
This connector can be chosen according to applications, using
together with other series products as follows:
Apr.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
(1) Cable crimping type (A3B series)
(2) Cable ID type (A3E series)
(3) FFC connection type (MA18 series, A3C series)
(However, the A3E series pin header corresponds to the A3E
series socket only.)
On the other hand, 44 contacts are available for AT bus
connection, and 55 contacts for SCSI connection.
2. Batch Insulation Displacement
1 mm pitch ribbon cable can be insulated and displaced.
type without polarizing guide
3. Mechanism to Prevent Mis-insertion
type with polarizing guide
The connector on the socket side contains a mechanism to
prevent mis-insertion in the connector on the header side.
■Product Specifications
Current rating: 0.5A
Operating Temperature Range:-55 to +85ç (Note 1) Storage Temperature Range:-10 to +60ç (Note 2)
Voltage rating: 125V AC
Rating
Operating Moisture Range:40 to 80%
Item
Storage Humidity Range:40 to 70% (Note 2)
Specification
1. Insulation Resistance
Condition
1000M ohms min.
250V DC
2. Withstanding voltage
No flashover or insulation breakdown.
300V AC/1 minute
3. Contact Resistance
40m ohms max.
0.1A
4. Vibration
No electrical discontinuity of 1μs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Humidity (Steady state) Insulation resistance: 1000M ohms min.
6. Temperature Cycle
96 hours at temperature of 40ç and humidity of 90% to 95%
(-55ç: 30 minutes →15 to 35ç: 5 minutes max.→
No damage, cracks, or parts looseness.
(+85ç: 30 minutes →15 to 35ç: 5 minutes max.) 5 cycles
7. Durability (Mating/un-mating) Contact resistance: 50m ohms max.
8. Resistance to Soldering heat
100 cycles
No deformation of components affecting performance.
Solder bath: 260ç for 10 seconds
Manual soldering: 350ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
■Material
Part
Material
Finish
Remarks
Black
UL94V-0
C26
PBT
Pin header
Brass
Selective gold plated over nickel
Socket
Contact
Polyamid
Socket
Insulator
Pin header
Beryllium copper
underplated
–––––––